Delrin Oval Labret Plug - Gold Stripe Overlay

These Delrin Oval Labret Plugs Feature a partially Inlaid 9ct Gold element that finishes proud of the flat face of the plug, resulting in a light catching, classy layered design.

Available in your choice of 9ct yellow or rose gold, the width of the gold element will be 5mm for most sizes, smaller sizes will be made with a 3mm wide gold element. 

Unless otherwise requested, as standard these will be made with an 11mm wearable length, 4mm wings with a gentle concave backing.

We size our oval plugs by circumference, so they will have the same circumference as a round plug, order with confidence that your oval will fit. 

To measure your oval to a round size equivalent, wrap a narrow strip of paper around your piece, mark where it overlaps the end, lay the strip out and measure between the marks in millimetres. This is the circumference, then divide that number by 3.14, (Pi) this will tell you the size of your plug. 

We strongly recommend you correctly measure your oval labret plug by circumference as explained to avoid miss-ordering an incorrect size, we will not replace pieces if you have failed to measure your current piece correctly.

All our PTFE & Delrin jewellery is handmade and as such, may vary in size by +/- 0.2mm to 0.3mm.

Unsure how to measure your jewellery? Check our handy guide