Delrin Teardrop Philtrum Plug

Simple, yet very aesthetically pleasing teardrop shaped plugs for stretched Philtrum piercings. 

We recommend these for well healed piercings, we carve these with a very slight convex front, with a slightly tapered wearable to reduce pressure on the inside of the mouth, unless requested otherwise these will be made with an 11mm wearable length and an oval shaped backing with a slight concave, and wings about 3mm wide at the sides, larger sizes will feature a "T" shaped backing.


We size our teardrop plugs by circumference, so they will have the same circumference as a round plug, order with confidence that your oval will fit. 

To measure your non-round plug to a round size equivalent correctly, wrap a narrow strip of paper around the wearing surface, mark where it overlaps the end, lay the strip out and measure between the marks in millimetres. This is the circumference, then divide that number by 3.14, (Pi) this will tell you the size of your plug. 

We strongly recommend you correctly measure your non round plug by circumference as explained to avoid miss-ordering an incorrect size, we will not replace pieces if you have failed to measure your current piece correctly.


We measure these by circumference, so order your current size.  

If you require any changes to our standard specifications, please leave a note in the comments box. All our PTFE & Delrin jewellery is handmade and as such, may vary in size by +/- 0.2mm to 0.3mm.